Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mipsel_mips32.ipk
Size: 23543
SHA256sum: b02d8fbbe7b0d2934f2dfe414455214ae94a6f61a9e73f8b7de2eb17c7fda099
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: alfred_2024.1-r1_mipsel_mips32.ipk
Size: 27764
SHA256sum: 7751112a5fcf29f0d0100bf42202cd3dd4141d12c8e67e70af2c237f284de9bb
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mipsel_mips32.ipk
Size: 4647
SHA256sum: 9c7fbad64e7f8acc4d8bb1a2dc4c7d0a0e7542f67bebf450f1e9762d26853c38
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mipsel_mips32
Installed-Size: 153600
Filename: babeld_1.13.1-r1_mipsel_mips32.ipk
Size: 63977
SHA256sum: 832909880270dc84876a6c7a01894f474106c91e037b269ab92bfb6a03a5c543
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batctl-default_2024.1-r1_mipsel_mips32.ipk
Size: 42644
SHA256sum: 4bf272b2ab41da60db0323c60ca671442b941d82717bdb01392f867d5a1d3dc6
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batctl-full_2024.1-r1_mipsel_mips32.ipk
Size: 50207
SHA256sum: f076aeeff5bc68690853e946e74cc88992f30f86721f2b1be316eebbcbb362a3
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: batctl-tiny_2024.1-r1_mipsel_mips32.ipk
Size: 14523
SHA256sum: 63656db35ddbbe29285362c76c1c1597404ec8e3b308d05e4aaf299cc235fabc
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batmand_1440-r1_mipsel_mips32.ipk
Size: 40178
SHA256sum: 08597be52cbffd3018a8fbab91dbeb51c043b16ce32841641838a6a802deb8c0
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 1075200
Filename: bird2_2.15.1-r1_mipsel_mips32.ipk
Size: 392691
SHA256sum: 565a18890b1a4952bb5f425caad3462ad6b64afafede1fdb5f04c966d34f15b9
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bird2c_2.15.1-r1_mipsel_mips32.ipk
Size: 10519
SHA256sum: 92089258e3364f26698c10dc3c86a601474aefa944629923f52be8e1fc21e3d9
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bird2cl_2.15.1-r1_mipsel_mips32.ipk
Size: 9216
SHA256sum: c881cb4c3db2de8f20a10b8ff23c9deb1188a0c67af62712c2c5ba330a45fbf5
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mipsel_mips32.ipk
Size: 4690
SHA256sum: 11a3c93e816bf3d43b0cec17fa1ae842660fd803e6d8ed360a87d57374d430f8
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mipsel_mips32.ipk
Size: 8595
SHA256sum: c3dbba7102b7b21de14d0293bae311dd84f2ece106dc14f6b9621e1c80ac9746
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mipsel_mips32.ipk
Size: 6119
SHA256sum: 9b2c962013cc3abc4d1d6433fc0a6695a41568d41f5e92ab769951042b7b1349
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_mipsel_mips32.ipk
Size: 10141
SHA256sum: 5d8032a56fbd78542816ff768c7f7a9e01c05e72be24b42c712d80cca004be70
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mipsel_mips32.ipk
Size: 5643
SHA256sum: c82049ed9fce408ac1c9cc322f596bda56bc1e9d421d36c158945f12c8d0e05b
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mipsel_mips32.ipk
Size: 25861
SHA256sum: c776e6d2d2ec262f791c21000fff78ba09825c1e688a0249a373dcbdcabdab92
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mipsel_mips32.ipk
Size: 8816
SHA256sum: 56c81bc5499148cc3be6fb36162fc08506fa2deed7f5b31f2707f2fbba064405
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 419840
Filename: bmx7_r2024061001-r1_mipsel_mips32.ipk
Size: 175618
SHA256sum: 8967e9088b16342252f11b4f87f9b0e6bbd16acc68ecca76be25efee7f872e54
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 901120
Filename: cjdns-tests_21.1-r6_mipsel_mips32.ipk
Size: 377675
SHA256sum: 1779da7f30c7ce3c2f3e94d13f064b5dd653bfd7e15c387e2f86e25c55834b6a
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 1064960
Filename: cjdns_21.1-r6_mipsel_mips32.ipk
Size: 454974
SHA256sum: 4b1657f03d05eefc31371d393859ab5bf170d5f1f5ec71e99164a7954a951ef2
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 1418
SHA256sum: 12608c89c3d0b0fd2939f1bdd3a58d830ba1f2bd08337ece8feed6190f948ee9
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 953
SHA256sum: 01b6df5900d74db7662c81208e669a578fea7f35b64862286ae60fac04a1d173
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 939
SHA256sum: 97ece994c100b27f26149afa39d2c5359ea1a03c052a3061dbb414f18b5a3e58
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 96857
SHA256sum: 1e4b9724c49c051ebf7a31104515b2e245cb0c96ccd495695938da51d8f83905
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 106799
SHA256sum: 9b1a7735506ae33579624785e6a29384d256e5d1c034123fe2ef5fe5a4051d71
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mipsel_mips32.ipk
Size: 6583
SHA256sum: 51fca02b05e6a59e10d490b9929d65712686f8dd3a5ee08acbc7f036b2b4d63f
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 57615
SHA256sum: 31ba216c47a6ed4debe25bc6e29c039619c20a92db0ef52076556e21e2f01fa9
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: mipsel_mips32
Installed-Size: 419840
Filename: mcproxy_2017.08.24~93b5ace4-r9_mipsel_mips32.ipk
Size: 120244
SHA256sum: 3392ebd85554fcfc67b42766445bf96f051fc76e6c2c536c0cf05771611b119e
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.0.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 112640
Filename: mesh11sd_4.0.1-r1_all.ipk
Size: 23609
SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mipsel_mips32.ipk
Size: 7599
SHA256sum: 0837abb8430a99b96d464b7eeadbbd3238196c3527089a2070cfc5d93b188fd7
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mipsel_mips32.ipk
Size: 31462
SHA256sum: db7ed1250e9c4f455dfe3c627b0b96e90727988d1bb5aee3f4c14a0b9a8bd506
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mipsel_mips32.ipk
Size: 46210
SHA256sum: 549fcc784dbd1d7679e27f668345a955717e607b7a49aecbf23656d85e9a603a
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mipsel_mips32.ipk
Size: 12011
SHA256sum: f3ab1e53af268ba814918e55981612b422016869df67dbcd421e14407cb9bc75
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 2728
SHA256sum: c2287d4c3bc2e2ecb8e09aa079dff0f71b72cd80bfcbd9def78c83486f2b3ff7
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 12709
SHA256sum: be88e10f307bee3004b0fc23c9ad9b2ce3e9914c75f70cab9abb5d37421f4ecb
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 4449
SHA256sum: a468f63614e17ecb5d08badac443329973be1da2ee67a41b830014b2c2572ed5
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 3058
SHA256sum: 3bf32473a0eb6bb7bc9049a0f37b7d1753d9b155036797f0863302d62227873c
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 4837
SHA256sum: 6f2254dfa2acc931ddf973f6b183d33ccbdee389fd08940b35afdfd49f2564ba
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 3227
SHA256sum: db69dd04466ecd8699ecc07eb2ff0c0e1ca644b9992ed402f80df955aad13f05
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 31612
SHA256sum: 473c1cb95e86c1fb2687445912effda3974861ce9b720fe39df9dd97218cf9a1
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 23634
SHA256sum: c59ef0d05bee7498aa73a894148025c3f126769ef2fbf257d281b5585c191cc7
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 9525
SHA256sum: db892c0ba332543b448343c0cf6bf69635db4355f1560fcf247d1a08ba58afdc
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 11934
SHA256sum: 26eafccce6e85f13bd69b9ace4c0fe1f51e2e8d834e73f44db245ada238ba148
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 13921
SHA256sum: b222250d82a3bba9adfbe4cf1220605c327b6cc18e7db49b796749a8d2ef0e7d
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 9189
SHA256sum: 60c23e8ff1d8f37ac74d43a1e59359ab5c682498ec8a57673f9a27d8065ac77e
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 3583
SHA256sum: 39b060f37389baa298b3086d39362ba92dfae4da9d21b4aaafb12018e80ec8e3
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 256000
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 62826
SHA256sum: b7d013b562b2a351df296b2748699f57cdad9f25034dbf53cd8f085808a4cca1
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 6965
SHA256sum: e27970b5a52bef7089e3247c32cb1e3d0ceea33b255f5135c992dabd3925e9ab
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 11041
SHA256sum: 0bb962a70596b70099a5be57337c17db261858db7167d5fcc53d85ba3c12edfc
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 5188
SHA256sum: 7c0c8dc427c6c8f8e672768c4fcb89b818c921131a3b71eac7dd467660de5873
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 15677
SHA256sum: 19176daee8678713c06a90ed21f920868d819d997ea06d231c3bbaef16bb6992
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 2401
SHA256sum: 44fce02446cac88f656f295963fb0c119a6cbb40e3a7d682fb4f54b2b23a45db
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 1951
SHA256sum: b3b2a8a91350f5a59a9b43fa4bcef3d99e8586bb778c64f26e15a307311f6a58
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 368640
Filename: olsrd_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 139075
SHA256sum: 0b01deb33e13401a0f73a45fa43bb75f19c17ae76770eb73a594f0e2450e6cdf
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 430080
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mipsel_mips32.ipk
Size: 160626
SHA256sum: ad8bb6e2c002d8766d6b127ace2f9a0aabd0773dee8b953737ebdbb94d0748fb
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 430080
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mipsel_mips32.ipk
Size: 156586
SHA256sum: 53d68d91661b47f505124725148cdf12a0c0d7474cb01d98b539220780cfe96b
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mipsel_mips32.ipk
Size: 2302
SHA256sum: 1be9b40d3ce9976375c5afda1cb5766efdf9e03635cedc47680e39a0fe1b736f
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 634880
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mipsel_mips32.ipk
Size: 232662
SHA256sum: 89cf07d9fe3a51bc2b1f549089522a8c2bf89b4bf395dd2461a3fd52a89e9797
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mipsel_mips32
Installed-Size: 634880
Filename: opennds_10.3.0-r1_mipsel_mips32.ipk
Size: 158443
SHA256sum: 50f8c7db46ec34c8d18b6be25aad137164a94bfb1a10c39b7b833e0b18b36353
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mipsel_mips32
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_mipsel_mips32.ipk
Size: 79398
SHA256sum: 1976e23d6b197b33011dc1a9a16fad11b2c18d5c35dc66bf2e010e85809b29b9
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mipsel_mips32
Installed-Size: 215040
Filename: prince_0.4-r3_mipsel_mips32.ipk
Size: 34033
SHA256sum: db8e0eba04cd1fec71362b261429ca4b73f30924348f41ecb89ed3e51e013d3e
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mipsel_mips32.ipk
Size: 11140
SHA256sum: bb4787b419f5840c3e3b04c64db2be44a69fe9f58d0d88715c311f493f828520
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mipsel_mips32.ipk
Size: 9784
SHA256sum: 56cc0dde510b5b522448ba2c23629065bfed48c4335baba75fb369776bc13662
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.