Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mipsel_24kc_24kf
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mipsel_24kc_24kf.ipk
Size: 20275
SHA256sum: bcc302a1749517f74466d9eb511708995daed4792182ead424680c6499fbe5e3
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 143360
Filename: alfred_2024.1-r1_mipsel_24kc_24kf.ipk
Size: 24648
SHA256sum: 850aac8e61ff77057343910b82cb1f187da48018bba560a9b855567a6c28709d
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mipsel_24kc_24kf.ipk
Size: 4264
SHA256sum: d8a1d90026fe009194d5089cc860bf81c354e51c27cb61cb46ad858d0dcf849b
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mipsel_24kc_24kf
Installed-Size: 153600
Filename: babeld_1.13.1-r1_mipsel_24kc_24kf.ipk
Size: 55146
SHA256sum: 0758faade52f0cdc8a80a06c1cd11688bd8f71c6f7247753876307db562b3376
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 143360
Filename: batctl-default_2024.1-r1_mipsel_24kc_24kf.ipk
Size: 38015
SHA256sum: 819e12d4c6a35703b73af35bcbc698e34dbc351cf763d2fa4e3ca3865d6af25e
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 143360
Filename: batctl-full_2024.1-r1_mipsel_24kc_24kf.ipk
Size: 44380
SHA256sum: c370e98128097969b999e6c839a7735c8693f32c8ccbd748ffa6e83db2062b76
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: batctl-tiny_2024.1-r1_mipsel_24kc_24kf.ipk
Size: 12856
SHA256sum: 6fb669d83de19053ce6b6ef6a18690c51679b7ca80f3ecbe9c0c40410090c63e
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 143360
Filename: batmand_1440-r1_mipsel_24kc_24kf.ipk
Size: 35925
SHA256sum: a5c396495dd973860afefc7e08b0bbbf7bc2494a15124e9258e0a8af58878453
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_24kc_24kf
Installed-Size: 870400
Filename: bird2_2.15.1-r1_mipsel_24kc_24kf.ipk
Size: 353416
SHA256sum: f2b9e57c3497915a29576e942384a82a0268def960193e54211b55222e20c0f6
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: bird2c_2.15.1-r1_mipsel_24kc_24kf.ipk
Size: 9781
SHA256sum: dce42ddfc5a67ec06c201e5653a44f1a68a4facb6ac9d0756cb60b9eda48cbf8
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: bird2cl_2.15.1-r1_mipsel_24kc_24kf.ipk
Size: 8579
SHA256sum: d1ac4f1a0dc6350aa4a053f11212e06ae47f1126ae1b5af2ccd017fb4bc70856
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024051906-r1_mipsel_24kc_24kf.ipk
Size: 4656
SHA256sum: bfddf5cbcb8f01c99bfa5bd9462fa04eeadd364760721956e344af781ea467a4
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: bmx7-json_r2024051906-r1_mipsel_24kc_24kf.ipk
Size: 8149
SHA256sum: 7211bd34953d3d611700b7e75583ab742cc37275a8d2c7cbb06c68f949ac50ef
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: bmx7-sms_r2024051906-r1_mipsel_24kc_24kf.ipk
Size: 5902
SHA256sum: 173cd3fe3c080920d1889ff0f1ec156152fd018715ffc8f034e3488d3c9c0091
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: bmx7-table_r2024051906-r1_mipsel_24kc_24kf.ipk
Size: 9535
SHA256sum: ba95403ed76a946eb156135aca594b41cce73c9c17393c11bf8ad18cf958aaa9
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: bmx7-topology_r2024051906-r1_mipsel_24kc_24kf.ipk
Size: 5623
SHA256sum: 7834b87c7493ff5caae455a10363aaeac075402f2c4137966f1266f10568dc2d
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_24kc_24kf
Installed-Size: 81920
Filename: bmx7-tun_r2024051906-r1_mipsel_24kc_24kf.ipk
Size: 24587
SHA256sum: ab460dd4acf67e0a7dcfd566363b8c2a026c17a1ba763e2efbb47ce7c698ff86
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_24kc_24kf
Installed-Size: 81920
Filename: bmx7-uci-config_r2024051906-r1_mipsel_24kc_24kf.ipk
Size: 8320
SHA256sum: 2486863fc1051397fe94b156dc57300070ae9701d0408bdcbaf41bbc30424ca6
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_24kc_24kf
Installed-Size: 358400
Filename: bmx7_r2024051906-r1_mipsel_24kc_24kf.ipk
Size: 156838
SHA256sum: aaddad383146ccebf0033e8e1f6af288f8a94485b953be95b9ac4b9d9d1a64a2
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_24kc_24kf
Installed-Size: 696320
Filename: cjdns-tests_21.1-r6_mipsel_24kc_24kf.ipk
Size: 331587
SHA256sum: b0cb974b71c114892fc5a2d1ae2a4ef3a189250aa27668f3a154043b07922114
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_24kc_24kf
Installed-Size: 931840
Filename: cjdns_21.1-r6_mipsel_24kc_24kf.ipk
Size: 399053
SHA256sum: 71dd283964ab86de21019259bd98d0043cf0467692c5dab2240352e956ec9dfb
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_24kc_24kf
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mipsel_24kc_24kf.ipk
Size: 1421
SHA256sum: 01eb8dd123695a0492e9f2a0af7c262b43d968cda57aea4bd3e8591e66d26749
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_24kc_24kf
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mipsel_24kc_24kf.ipk
Size: 959
SHA256sum: 205b44b1260118c93b57c196b719e63b29b870b13b787db82a0afda7ca6257b7
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_24kc_24kf
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mipsel_24kc_24kf.ipk
Size: 943
SHA256sum: caf10962d159c3a3755be77db850239aa0724ab979e263290803313f14123c9a
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_24kc_24kf
Installed-Size: 163840
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mipsel_24kc_24kf.ipk
Size: 84541
SHA256sum: 0b02d256ea3ef54c3354f4f00b71184c3aec3218eacc00c2ef7ab5ead9f2a2bd
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_24kc_24kf
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mipsel_24kc_24kf.ipk
Size: 93161
SHA256sum: c7f6e6a43ad60909feb492e3a3269a5eb9310d35f8bd9a1ac2f0d91f2625fcf8
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_24kc_24kf
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mipsel_24kc_24kf.ipk
Size: 6589
SHA256sum: dcf1d6f41f1319c610249e9176b9332d6668858a4d10fe10f6943d7a8d96fcc4
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_24kc_24kf
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mipsel_24kc_24kf.ipk
Size: 57618
SHA256sum: fc2502cd1c2c4b543d2c0ff22e5f650103a327e6d1c16e03a4713aebc7a88e26
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: mipsel_24kc_24kf
Installed-Size: 348160
Filename: mcproxy_2017.08.24~93b5ace4-r9_mipsel_24kc_24kf.ipk
Size: 104668
SHA256sum: 70827eea0c3df30a8f1b3bc3f869d326cb23543a3c67201f8278a3ffb816ad47
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.0.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 112640
Filename: mesh11sd_4.0.1-r1_all.ipk
Size: 23609
SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mipsel_24kc_24kf.ipk
Size: 6612
SHA256sum: 6e92b5a5646dcac54d0e885c9b5d9c6b2ad4f85da35b770d41a6cfe710a78a7d
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mipsel_24kc_24kf
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_mipsel_24kc_24kf.ipk
Size: 27710
SHA256sum: 1618ab365ebf5b2dfcded2c2d168167e3070e47e5e573c6b83b4d0753cfa8f99
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mipsel_24kc_24kf
Installed-Size: 174080
Filename: nodogsplash_5.0.2-r1_mipsel_24kc_24kf.ipk
Size: 42942
SHA256sum: 8010de7636ce91560575f2b8b60046166e71f51979625b7b7ae329b2c46ac646
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_24kc_24kf
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mipsel_24kc_24kf.ipk
Size: 10176
SHA256sum: b5a18338ad2058fe971a6771b11e67f260822002f52ff9e8376100e8c083f980
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 2740
SHA256sum: 3645b9756968ca995f06af0a66a75df6569d21138cd2d099cc58e529cd5d7504
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 11663
SHA256sum: 24cafd7d2b14db56d57f39bd888b532faa273daec4dbf8c9279a09d04e9b72b8
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 4331
SHA256sum: e1b8cc1da474bb01dd91e175964ad5dec47f1dbf3c29b10e985839a0d6f4bb83
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 2931
SHA256sum: fc5db32c051657c2406ae9443155c4a842955d83224c770eea8aa41a4b849331
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 4432
SHA256sum: f7ab4feb215cb863b1059ac8f27bca031d6d2cfd13b289e890c56b97f298127f
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 3171
SHA256sum: acc6852701b33591831d20373d844d7e8ff99505f424d8eca569ab20a69a248c
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 31003
SHA256sum: abf0fb425758ae1899a94d5762fc722c194c0b100bad0422b0961469a8d35623
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 21674
SHA256sum: 7e8ff8b491a3c3312d57a81238298b98108fb286f684f44ab7eb82a5c9d694b0
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 9003
SHA256sum: b7329a653f51a06db82cfeca310b9bf519aee33c040c11d7449580c61bfdc6f1
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 10816
SHA256sum: 74cca133796679a6a3a7fc5637fc3f1b4b5ba196656c673078be8e0a2a14f32b
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 12652
SHA256sum: 7c37cdcce4ad693f99ed11a6201f2504feb52b9ec75da118d3859db7c2f8d789
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 8560
SHA256sum: 9dab1bb306cf29fd1e1e109320e8441265cd98fdee15b1453baf6aeb2d8c3fd5
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 3506
SHA256sum: d6c496e22942f16e0688221bf6e22786f91ab491dae4e083c3733077837538d1
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 153600
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 59871
SHA256sum: 03ca7e28e6cedf907cb6e753b0a63150924217cfa8a309c789006ca395d1b6ab
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 6579
SHA256sum: c24ae088af1212144d5182900fa53b57c20efbc00a1614a24814bd9b8c6629dc
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 10616
SHA256sum: 373bc6650e7f44e24177969b97ca3557ec93fb92076923a3d8b05588624779e7
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 4971
SHA256sum: 8fe43311d16b11db6dae8a8b1892b33418dc3d885253e37eb1e745a419feda27
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 13846
SHA256sum: d5dbf74ece0e7ef29a7c775566aa3998683892a137764ba97c0acbbecbfcb5a4
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 2438
SHA256sum: 82d897012f57edb12612998583970e376c0097de4f02b9fc94c223a2393ad1d4
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 1959
SHA256sum: e038cc8b10fd0a301f000d201aee9c785a8abeb4b404ad6b0613c51c71e6e530
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 307200
Filename: olsrd_2023.06.12~a9b3f1ac-r1_mipsel_24kc_24kf.ipk
Size: 127547
SHA256sum: b211087eac1e098ac5dcdbb704dfda14434e9a97574f088c789cdb1cb6c7970f
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 296960
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mipsel_24kc_24kf.ipk
Size: 136513
SHA256sum: 290e25a438114b56dcfe3c705d318c4b93ed695b46a7389c0c5a2ac1a690501e
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 296960
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mipsel_24kc_24kf.ipk
Size: 133330
SHA256sum: 0d6032472b949612e4d89a5e0c339e68d403e85b80f49375ae2093173a2e5ea6
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mipsel_24kc_24kf.ipk
Size: 2302
SHA256sum: 3b7f209e7c3c9e194b6e9ae47bd29f931847c7e6dbe818e18c5e513192975cf3
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 440320
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mipsel_24kc_24kf.ipk
Size: 197605
SHA256sum: 8d8e8e8460ec41600ffe41899d1687144ea99e516fca14cf00986af94d1f3d13
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mipsel_24kc_24kf
Installed-Size: 624640
Filename: opennds_10.2.0-r1_mipsel_24kc_24kf.ipk
Size: 153810
SHA256sum: bb36e7a42d1809a979aa1ed52d8b127e9e52dd4b766a58f680db8b7fbcd6a5f3
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mipsel_24kc_24kf
Installed-Size: 153600
Filename: pimbd_2018.06.19~dbf4e591-r4_mipsel_24kc_24kf.ipk
Size: 72562
SHA256sum: 1a719574feca58c08d09aca19e9eed118aee14bae3f43ccfa29dc6781e7d91a0
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mipsel_24kc_24kf
Installed-Size: 215040
Filename: prince_0.4-r3_mipsel_24kc_24kf.ipk
Size: 32442
SHA256sum: 09ddf53788a5a5c092c1f3082db5c52fe796289b5417df0d6bafbe93e981baf6
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_24kc_24kf
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mipsel_24kc_24kf.ipk
Size: 9762
SHA256sum: 15c300c2e16532c8004d3e25abaaa47c817bb546b0500c0a8154431c29c8ee42
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_24kc_24kf
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mipsel_24kc_24kf.ipk
Size: 8166
SHA256sum: 5cbfeea188565438d0a4eb53ab80288fd2fcc4e748cf4d7bb51724172b779391
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.