Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: armeb_xscale
Installed-Size: 61440
Filename: ahcpd_0.53-r3_armeb_xscale.ipk
Size: 22612
SHA256sum: 284f812b50ee9a4cc5a12d1d15c7190d9874dfe2f1541dd92ec46866d3acef66
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: armeb_xscale
Installed-Size: 71680
Filename: alfred_2024.1-r1_armeb_xscale.ipk
Size: 26071
SHA256sum: 31388fd83378ab9c1c53d79fb83541ebeb443de193b0cc345100b905d38cb849
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: armeb_xscale
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_armeb_xscale.ipk
Size: 4611
SHA256sum: 6f1162292a351cfe77eeda3adec1729b2cbfeb40e6b9533f1c8a4b4b2bcbdefb
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: armeb_xscale
Installed-Size: 133120
Filename: babeld_1.13.1-r1_armeb_xscale.ipk
Size: 62814
SHA256sum: 8a9c9ae5e1dfb1229af75d810f972202294422f823806dca6020c9c35be486ec
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: armeb_xscale
Installed-Size: 102400
Filename: batctl-default_2024.1-r1_armeb_xscale.ipk
Size: 43664
SHA256sum: 97d53c4d5520a6e567034ab4f9fe01df56af44a1c543b7b0c25b1019c22f16c6
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: armeb_xscale
Installed-Size: 112640
Filename: batctl-full_2024.1-r1_armeb_xscale.ipk
Size: 50799
SHA256sum: a03e817f0bc416f560a2e942313ed212f6157b9c5ae9d7a0e95feab4fcbd6f1e
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: armeb_xscale
Installed-Size: 40960
Filename: batctl-tiny_2024.1-r1_armeb_xscale.ipk
Size: 14764
SHA256sum: 6b5a762dcea078e24506e4c62b82c00b8434675b35d72c399b7071f17c484d5a
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: armeb_xscale
Installed-Size: 102400
Filename: batmand_1440-r1_armeb_xscale.ipk
Size: 42842
SHA256sum: 71a0faae223b2bd6f15b11b5abd0f6faf156391f36061784add2b7570b640445
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: armeb_xscale
Installed-Size: 983040
Filename: bird2_2.15.1-r1_armeb_xscale.ipk
Size: 384074
SHA256sum: c352db02ea0dcf44b9b550c3b439bc7bee9731062fca19c317d7cbd965661337
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: armeb_xscale
Installed-Size: 30720
Filename: bird2c_2.15.1-r1_armeb_xscale.ipk
Size: 10373
SHA256sum: 78bf64d39f6e6355fd49a02ee1d211d7d9b56f1a78208415ff1bad6f42f3b254
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: armeb_xscale
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_armeb_xscale.ipk
Size: 9003
SHA256sum: 6c4c9b936b3751028734d521c36667b768d21bdaeb81b74957178f2199715f6f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: armeb_xscale
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024051906-r1_armeb_xscale.ipk
Size: 4839
SHA256sum: fe1ed29a3386e876364b7a04b98edafb1d6a6f7b20313adc3495cb48dc3fbc96
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: armeb_xscale
Installed-Size: 20480
Filename: bmx7-json_r2024051906-r1_armeb_xscale.ipk
Size: 8468
SHA256sum: d2dbe23c9f846b00b72fe24504c89e3bb678920b6fb342453ac51748be23b753
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: armeb_xscale
Installed-Size: 20480
Filename: bmx7-sms_r2024051906-r1_armeb_xscale.ipk
Size: 6071
SHA256sum: 29b8d770311ad8e1fe71b72b39d5b0b4f9d6ff941e91b0167c2def171c52c7b6
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: armeb_xscale
Installed-Size: 30720
Filename: bmx7-table_r2024051906-r1_armeb_xscale.ipk
Size: 10265
SHA256sum: 2d6137b4335c1c5c0245ed701cbf2f1d0b97002f5ae78a3c708a465c745cae81
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: armeb_xscale
Installed-Size: 20480
Filename: bmx7-topology_r2024051906-r1_armeb_xscale.ipk
Size: 5764
SHA256sum: a3d1a88ab26e4f5b63b828301ec9b7b3bc88685c899e7055189b7e7187a96e6f
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: armeb_xscale
Installed-Size: 61440
Filename: bmx7-tun_r2024051906-r1_armeb_xscale.ipk
Size: 26448
SHA256sum: 06e5a67931c1c4fdbf0f3252ce866ec6e299c2c3332ddef87f6bc9587fd6aea9
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: armeb_xscale
Installed-Size: 30720
Filename: bmx7-uci-config_r2024051906-r1_armeb_xscale.ipk
Size: 8902
SHA256sum: 9e962bc4241622366448eff8e615f040bd937be0198ff7d3c1f2625cc7277873
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: armeb_xscale
Installed-Size: 348160
Filename: bmx7_r2024051906-r1_armeb_xscale.ipk
Size: 172247
SHA256sum: 3d2f819bb2789ec29e7b6708c122d5ad2121e4d6bbd4b3527329676edaf35c11
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: armeb_xscale
Installed-Size: 747520
Filename: cjdns-tests_21.1-r6_armeb_xscale.ipk
Size: 342539
SHA256sum: 91b17de69d8d0eeff371e2e5899e1a6f4d94c339d339413eb6c831391b8a2a4f
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: armeb_xscale
Installed-Size: 890880
Filename: cjdns_21.1-r6_armeb_xscale.ipk
Size: 397201
SHA256sum: 0fc41250c120c44aebf522df8fef7b72617520f2d31becb405122630fae006e0
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: armeb_xscale
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_armeb_xscale.ipk
Size: 1419
SHA256sum: 7d9100f2c0fad7183f4279c646c56ac92d95e8e17cd141a7eca60f5ac62b2aea
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: armeb_xscale
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_armeb_xscale.ipk
Size: 953
SHA256sum: a9bde8ab2be49f7aa27936c9fb2292c5fb603f07978d48c02c428248e1d7408a
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: armeb_xscale
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_armeb_xscale.ipk
Size: 939
SHA256sum: 9d6690f22010c7d22da4f11e4b657ea325076cf2661e4f602ed1aeaa0d6f409d
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: armeb_xscale
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_armeb_xscale.ipk
Size: 94221
SHA256sum: 93842f4ba9687ab6a9dad8aef960e84bbe18aafd5cd73bdcec7c3bbb4b71b256
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: armeb_xscale
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_armeb_xscale.ipk
Size: 103950
SHA256sum: bb033851e8f779c04bccabc463e69c38d662bd8e47f8c1aacc0c73ce56127bc4
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: armeb_xscale
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_armeb_xscale.ipk
Size: 6581
SHA256sum: e99bc1259dd01f62b4d6cc0b409fbd1d6160c66dba69cff63d5fc8db1e0c0552
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: armeb_xscale
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_armeb_xscale.ipk
Size: 57619
SHA256sum: c04a268ae9a5c00e749a261bbc6a4907fedf8fe2239acb1f4620222bc8c09fae
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: armeb_xscale
Installed-Size: 327680
Filename: mcproxy_2017.08.24~93b5ace4-r9_armeb_xscale.ipk
Size: 124365
SHA256sum: 7a3e416852050f4cc490991fdb3f6fba0e1b00e08701f7330142e75cb1b7c235
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.0.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 112640
Filename: mesh11sd_4.0.1-r1_all.ipk
Size: 23609
SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: armeb_xscale
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_armeb_xscale.ipk
Size: 7254
SHA256sum: 456d15d790beb542078914c92753e528dc2b6b30d183ad871940425db595b410
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: armeb_xscale
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_armeb_xscale.ipk
Size: 32395
SHA256sum: 0e55c9c94c0dd8da2abab9495f7d1ca078ba6a90d5cdcfa7f7e07ed8b224d8be
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: armeb_xscale
Installed-Size: 122880
Filename: nodogsplash_5.0.2-r1_armeb_xscale.ipk
Size: 47788
SHA256sum: df2505ede1742a28a165ce6de67aed24dc89b16c0ab89b0ff782543b70db1d01
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: armeb_xscale
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_armeb_xscale.ipk
Size: 10982
SHA256sum: a9cbb59657ce5201627a1454085b282c01121775fd31014293125a5e5da9a038
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 10240
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 2767
SHA256sum: 1a29fafd855eee46981394604de75f44cd834c5be4b5e15ad12147cbb057e7d0
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 30720
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 12863
SHA256sum: da3f72e41443ed6604406573f8b67136eee5653baebb9a97b9a1540eaf255627
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 4564
SHA256sum: 21fd035dd4227f6c84faa11585465a5bff48f1e7ab8c41c88fe434ff369c3a23
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 3088
SHA256sum: 382a00c3f3fd869977df5d2d214195c7d8da560bfeb31453003a6f6d0a5cc5bd
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 4760
SHA256sum: adac472ab5d92895f4ccd4c0ef5bf05ad9ca9067759e653e91e6d000a0c85072
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 3306
SHA256sum: 5c4c0ca18f3dd2b206713a0fcfa734cdf2b0add4e49ab1fcc1a63aba2cf37186
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 33745
SHA256sum: a481c492e0fdd4c9ed3fe8e509959f84093b27a32d95566a0920db78d6a3d7ae
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 25528
SHA256sum: 95815c5e3ceef0c766c796f0f176b2db36f89384ec22bcf0e10d269bba5ac6cc
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 30720
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 9762
SHA256sum: f1b9b9e82a4ddd661a87fb87d6c111ff53d7d1966bbcecc38840463638751a7b
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 11676
SHA256sum: 512586c0aa6294001fa8078e40eec8f72422783be16e7934170244a774402032
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 40960
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 14519
SHA256sum: f1f258c19e99a25f906d41ef4f63252fe5f064cefa0e3708da4a7d1d9e3ecc5b
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 20480
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 8984
SHA256sum: fccb699634b13601248899349083fefd8eb998eb393325d60fc87a499b5f0037
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 3680
SHA256sum: ff584c32d7faf6cb3e8c9bededd534c02f75a49c6bf06ad5ff3a45915e900ddd
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 184320
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 62278
SHA256sum: 4ef1ad77cb37173fcc1760502de43fb598152c53441a4cc38bf7ba8a0577154f
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 20480
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 6805
SHA256sum: 1a447157c22cc3712177ca42b36023505e9d1a329bf00f92262292d6d1cd19a5
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 30720
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 11128
SHA256sum: f95ca96b0b2af8d72f474007be28a3af062ff05b2ed957846db1ffd164b96ef3
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 5085
SHA256sum: 302db624b875a893a02d960b000ddbc98aa847670712d8de2b104ee777c47f62
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 16471
SHA256sum: 3f1ffd616b900182201c8adbafa3e97ab60fc8a7edf38a9abc3b96b1e104cdfd
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 10240
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 2363
SHA256sum: b515364b512a91fcc145b3e6022e331fc265d023a5c2c26c694e2246a848cefd
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 1952
SHA256sum: e5aedc0b757e2e21c0efb30367160c6466ebcfb68aae25bdeaa3af2974d19e31
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 327680
Filename: olsrd_2023.06.12~a9b3f1ac-r1_armeb_xscale.ipk
Size: 141926
SHA256sum: a0a1168dedf491de24b7f8484c94efdfc737d29ca56717f089eb6cb7c5d5de3a
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 368640
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_armeb_xscale.ipk
Size: 161983
SHA256sum: bbda16fb2307312cf9cd6c623740bb58a66220598dc38ccf08701741dee29bfe
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 358400
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_armeb_xscale.ipk
Size: 157876
SHA256sum: 8826fbfcc7ecb39b830b80f7c5be5a4e62b3052c4534376bd15064e3fadfd783
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_armeb_xscale.ipk
Size: 2303
SHA256sum: d321d3cce32c716b580b419c43ea861070083bc6306504e36e6e9b3268ae3c28
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: armeb_xscale
Installed-Size: 532480
Filename: oonf-olsrd2_2022.08.25~1cec9b21_armeb_xscale.ipk
Size: 235209
SHA256sum: 5e5b637b7b270a3f3a4662eef47b2ae6489eb3ce584c276d6ab56dd1b40fe946
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: armeb_xscale
Installed-Size: 552960
Filename: opennds_10.2.0-r1_armeb_xscale.ipk
Size: 160270
SHA256sum: 944a6e92d32155aa6891abd3e6dfdabdf6a49c364c089c26890a2c61d817127b
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: armeb_xscale
Installed-Size: 194560
Filename: pimbd_2018.06.19~dbf4e591-r4_armeb_xscale.ipk
Size: 82963
SHA256sum: fc6af67835dce1bb661501b1193e8e0425ee5428a9d7ae97216e36718501a66f
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: armeb_xscale
Installed-Size: 81920
Filename: prince_0.4-r3_armeb_xscale.ipk
Size: 27863
SHA256sum: f3ff0df8e37de41a71d3d8a7b5fdeccf53e03b784b931e63fffd760b6305cc25
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: armeb_xscale
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_armeb_xscale.ipk
Size: 11091
SHA256sum: 16241127cc352519e0fa6a1e7f2b3a79548037869d8af1db0a8b03854fea5fa9
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: armeb_xscale
Installed-Size: 20480
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_armeb_xscale.ipk
Size: 8765
SHA256sum: 20aca0a02644947a2415f00fcd1639166d4540bbf2160d8db832e6d1c8b8f490
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.