Package: ahcpd Version: 0.53-r3 Depends: libc, ip, librt License: MIT Section: net URL: https://www.irif.fr/~jch/software/ahcp/ Architecture: arm_cortex-a7 Installed-Size: 61440 Filename: ahcpd_0.53-r3_arm_cortex-a7.ipk Size: 22663 SHA256sum: f69d28dd909b97813b0c41c41d5916d2a180fb66b4d9868f58734db9b51ec44f Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a7 Installed-Size: 71680 Filename: alfred_2024.1-r1_arm_cortex-a7.ipk Size: 26071 SHA256sum: 7d383918602ff28d72b190b70b7dac41e595f2a9e6f915b710c3b77a29861c59 Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-r1 Depends: libc, librt Section: net URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/ Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: babel-pinger_0.1-r1_arm_cortex-a7.ipk Size: 4541 SHA256sum: 18332d06533d424983a53721e092fd15ce1f90721b2a76c4a28c65425935c125 Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-r1 Depends: libc, libubus20231128, libubox20240329 License: MIT Section: net URL: https://www.irif.fr/~jch/software/babel/ Architecture: arm_cortex-a7 Installed-Size: 133120 Filename: babeld_1.13.1-r1_arm_cortex-a7.ipk Size: 62875 SHA256sum: e06c33c70d134321b64fb6d59c08e7402c23d1fa5a2680ed5f2f24562a6f935f Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a7 Installed-Size: 102400 Filename: batctl-default_2024.1-r1_arm_cortex-a7.ipk Size: 43205 SHA256sum: 226eed6800200edbec12e27bdd4aa64dd1fdabf29cb578dd58750eb907676f0d Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a7 Installed-Size: 112640 Filename: batctl-full_2024.1-r1_arm_cortex-a7.ipk Size: 50462 SHA256sum: a2bbcceb960a8d7f697ce5da1ffe06e964d932d9fa11b2fa9edfab8902ee25e7 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a7 Installed-Size: 40960 Filename: batctl-tiny_2024.1-r1_arm_cortex-a7.ipk Size: 14619 SHA256sum: a02e32178db383431689ac8bdd92ec36172589513a7adf1a6691415c919f41c2 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-r1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a7 Installed-Size: 102400 Filename: batmand_1440-r1_arm_cortex-a7.ipk Size: 40838 SHA256sum: dabca7c01c88663975796315f3fd5e55ebd8b617180d07c0e7fc1060ebb6c507 Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.15.1-r1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: arm_cortex-a7 Installed-Size: 962560 Filename: bird2_2.15.1-r1_arm_cortex-a7.ipk Size: 377720 SHA256sum: 2bb6f2ae4c5b156b3194ed754e1232ede2e0266b205f8863e118996e25572e84 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.15.1-r1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: arm_cortex-a7 Installed-Size: 30720 Filename: bird2c_2.15.1-r1_arm_cortex-a7.ipk Size: 10362 SHA256sum: 96b09095ebc53e93ddffba76a83ed6a74525e9149a30ac955746499c035a4555 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.15.1-r1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: arm_cortex-a7 Installed-Size: 30720 Filename: bird2cl_2.15.1-r1_arm_cortex-a7.ipk Size: 8957 SHA256sum: 1578ef0905f4d77a750a98defe9c666304b07e1b477aa24d6de4d0b5432d04d6 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: r2024051906-r1 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: bmx7-iwinfo_r2024051906-r1_arm_cortex-a7.ipk Size: 4779 SHA256sum: c9f53f115dd0a7e881cca0e6dd6c5d2d098b37aedbf8f1d80975a5b6c67eb4c5 Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: r2024051906-r1 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: bmx7-json_r2024051906-r1_arm_cortex-a7.ipk Size: 8436 SHA256sum: 0a1959c1fa3798d2de61419b58e68de6335839fdc5025516f0561b84d07967fb Description: json plugin based on json-c Package: bmx7-sms Version: r2024051906-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: bmx7-sms_r2024051906-r1_arm_cortex-a7.ipk Size: 6040 SHA256sum: faf6a22c429c0e577d91efe5c7d8f53f5a20d5ccfde4a4af3f4b33f8244e0b1f Description: sms plugin Package: bmx7-table Version: r2024051906-r1 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a7 Installed-Size: 30720 Filename: bmx7-table_r2024051906-r1_arm_cortex-a7.ipk Size: 10373 SHA256sum: 53e89955b9b20d804bf2f507c7e90adf9d5b76023d113ae2f9ee4da2de036515 Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: r2024051906-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: bmx7-topology_r2024051906-r1_arm_cortex-a7.ipk Size: 5641 SHA256sum: ff4fa26172a81a344245adf14c44ce9cc760015bba82d982427fa628460f0a7a Description: topology plugin Package: bmx7-tun Version: r2024051906-r1 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a7 Installed-Size: 61440 Filename: bmx7-tun_r2024051906-r1_arm_cortex-a7.ipk Size: 26239 SHA256sum: 364b76d73ea7e942f00611a6bef472e0b052e2658d213e923e5a2e9cec62b8f6 Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: r2024051906-r1 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a7 Installed-Size: 30720 Filename: bmx7-uci-config_r2024051906-r1_arm_cortex-a7.ipk Size: 8898 SHA256sum: d8dc8d7a0dc28f971a24f29e5e6b2ba25a6db9ad088e6844063f70dbf7f0c236 Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: r2024051906-r1 Depends: libc, zlib, libmbedtls21, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a7 Installed-Size: 348160 Filename: bmx7_r2024051906-r1_arm_cortex-a7.ipk Size: 171550 SHA256sum: 9388e7da7047a96909b820475a0fb93c1c92a98d726861ddcfe4ce505baf456b Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: 21.1-r6 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: arm_cortex-a7 Installed-Size: 737280 Filename: cjdns-tests_21.1-r6_arm_cortex-a7.ipk Size: 342974 SHA256sum: 3769430f9f259b1f4628a4bee6a2854945a5ff0facd931a25e846a4047e97a27 Description: cjdns test cases Package: cjdns Version: 21.1-r6 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: arm_cortex-a7 Installed-Size: 880640 Filename: cjdns_21.1-r6_arm_cortex-a7.ipk Size: 397987 SHA256sum: 240ae0f1b2940ac190585d30d472a843accb0579eb6998e8e10176108ca69659 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: arm_cortex-a7 Installed-Size: 10240 Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_cortex-a7.ipk Size: 1419 SHA256sum: de341e19532a76f87197c2720288f858c663aaae7d99b678dee152821aef96c8 Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: arm_cortex-a7 Installed-Size: 10240 Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_cortex-a7.ipk Size: 954 SHA256sum: 041e79e384c0a8cd1e4e2124c92e55f4a9ecdcc66c0783661e29fad1ee15aa8c Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: arm_cortex-a7 Installed-Size: 10240 Filename: hnet-full_2018.12.21~c4376661-r1_arm_cortex-a7.ipk Size: 942 SHA256sum: 9919e0e94cd6f452718b1561980b7f80341e5830bbce6aa0c9394d99869de1ed Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: arm_cortex-a7 Installed-Size: 204800 Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_cortex-a7.ipk Size: 92776 SHA256sum: 85701e90708bcb649e69aeb2cb350673a67183055d04524b61dd6d8c8ef246a6 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: arm_cortex-a7 Installed-Size: 225280 Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_cortex-a7.ipk Size: 102549 SHA256sum: 6e4609ced2d50bb3f922c18b4aaf2604e31d2b77db3ff29ed31ae905b7287dea Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-r9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci URL: https://github.com/cjdelisle/cjdns Architecture: arm_cortex-a7 Installed-Size: 40960 Filename: luci-app-cjdns_1.3-r9_arm_cortex-a7.ipk Size: 6584 SHA256sum: 32b5bf83439ad15e6c624985055b7d0cb8bd1ef4b556dd658283de884edf3fbb Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018.12.21~c4376661-r1 Depends: libc License: GPL-2.0-only Section: luci Architecture: arm_cortex-a7 Installed-Size: 235520 Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_cortex-a7.ipk Size: 57616 SHA256sum: db743b2e71190a8d29708c72e7a0a19531f19dd7808d603caa7df752d16cc0ad Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-r16 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 61440 Filename: luci-app-olsrd2_0.2.6-r16_all.ipk Size: 7782 SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d Description: OLSR2 configuration and status module Package: mcproxy Version: 2017.08.24~93b5ace4-r9 Depends: libc, libpthread, libstdcpp6 License: GPL-2.0-or-later Section: net URL: https://mcproxy.realmv6.org Architecture: arm_cortex-a7 Installed-Size: 317440 Filename: mcproxy_2017.08.24~93b5ace4-r9_arm_cortex-a7.ipk Size: 122994 SHA256sum: 70f409028f47e232ff680c87b4902bbb2ad1cbaf5ac19f8952b40614a17775a4 Description: mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems. It operates on the kernel tables for multicast routing and allows for multiple instantiations, as well as dynamically changing downstream interfaces. Package: mesh11sd Version: 4.0.1-r1 Depends: libc License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/mesh11sd Architecture: all Installed-Size: 112640 Filename: mesh11sd_4.0.1-r1_all.ipk Size: 23609 SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon can dynamically check configured parameters and set them as required. In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014.12.12~2d6d1b0b-r7 Depends: libc, libubox20240329 License: BSD-3-Clause Section: net URL: https://github.com/fingon/minimalist-pcproxy Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_cortex-a7.ipk Size: 7187 SHA256sum: bacf473cef2c70f2ea638683fff600a7eef544a79f42ba402e10e14fae1c91f5 Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-r7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 20480 Filename: naywatch_1-r7_all.ipk Size: 2853 SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5 Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-r2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net URL: http://www.priv.nu/projects/ndppd/ Architecture: arm_cortex-a7 Installed-Size: 81920 Filename: ndppd_0.2.5-r2_arm_cortex-a7.ipk Size: 32767 SHA256sum: b671f1b60717a073ff3b8abaadcf3fc1ab9ae6b18d8ec68016f3a06f59ea3f0e Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-r1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net URL: https://github.com/nodogsplash/nodogsplash Architecture: arm_cortex-a7 Installed-Size: 122880 Filename: nodogsplash_5.0.2-r1_arm_cortex-a7.ipk Size: 46839 SHA256sum: 4a2c8fb0bac42cf56f81f15be5d059f40546fd4b854290a1de8fb37511665c5d Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329, mdnsd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: arm_cortex-a7 Installed-Size: 30720 Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_cortex-a7.ipk Size: 11017 SHA256sum: b649d11244a36d979ce6d4f42104a1cc8efb0b55b76870864b7263deb1fb9aee Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 10240 Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 2755 SHA256sum: 14c068096866ee7bfb97a80400e2a4278db91a0dfd67f14df5fba6b567b955e7 Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 30720 Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 12780 SHA256sum: bc6358f0ccbfd45feed0855605f48ebf5b61690dd36959162d4336e6dd38a836 Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 4581 SHA256sum: 4c739d68301c0f9c1eeef77409bb8e1fe7b528f4ef21cf548ec2e8bbb00ada1b Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 3052 SHA256sum: 965984adbc680accabbd7418aa899c08e8744e824d011655ed069afc4ef001ce Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 4733 SHA256sum: 81b468bfac399c5b67deb8c55db510e724da5a6201ba880006018ee2d306d240 Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 3226 SHA256sum: d6cf6503661222b350dfa39487d32714be75d18ee85df7bc19e2e7ac33365edc Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 81920 Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 33400 SHA256sum: c28b24d5a211424978da18d72f10a11c7cabda6027667b22276369d9d9b0337b Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 61440 Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 25246 SHA256sum: 6479f13038a4c0e42dc32fb0b064329a834a12d04b16469417abb8f251f690bf Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 30720 Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 9764 SHA256sum: be83dbc0838c17c51e5b4ea11047b046f9c57aa9b0d43b88c40c48e5735c20cb Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 30720 Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 11642 SHA256sum: 8639831953fefec50abc8f58b4d57126542c529c3ddd2f32cc5b3383f5f054da Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 40960 Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 14376 SHA256sum: d797c3e07e19b1ec34f534625597f25fde77626b6650c4b8d70a4425a4bf0d5a Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 8976 SHA256sum: 6e5ff2573b6c994cff9d466da56501e19584436a26958db40d6f7e3e2ab75eec Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 3660 SHA256sum: a655fa860fcc86a5be952f4f350d24036539415e7a69980b78ba8a369f90fd4d Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 174080 Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 60555 SHA256sum: 13a804dde2af679839fb449318739d44b3957939898e2118bbe2271781d4e654 Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 6857 SHA256sum: fe877250bf23ad583da584d5f8528079fa0bf1a8fceed7584eabab7adcf402ff Description: Quagga plugin Package: olsrd-mod-secure Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 30720 Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 11178 SHA256sum: ba52de29ecef526cb7bf2a15e8fd79d9f59b8d1d6c5644e70b769e91975010e2 Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 5095 SHA256sum: 6395c408d4389a6acb5d60d0603d268dc262fc278d685cc394f796b604e2a043 Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 40960 Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 16189 SHA256sum: 50fe4b07c126928a1b40d3c6542e2c12524f2ff08939a985a305e7124ce8bb06 Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 10240 Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 2355 SHA256sum: c129c444541f64678a31ad938213904d4df05ddfeccd7fc21b658eb626b48626 Description: Watchdog plugin Package: olsrd-utils Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 10240 Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 1949 SHA256sum: 08b76fba74ad711c6970fdfc66e76a8730c6b4376273f996905d0906041de637 Description: Utils for OLSRD Package: olsrd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, libpthread, libubus20231128, iptables, ip6tables License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 317440 Filename: olsrd_2023.06.12~a9b3f1ac-r1_arm_cortex-a7.ipk Size: 140910 SHA256sum: e1db733459d57f135967a554f169bf95cb2bc7b81f93047662a45c45f1e5fc79 Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 378880 Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_cortex-a7.ipk Size: 160370 SHA256sum: e284847e8ae77bba902a97c5d76aede56c256921f56f7e5c2a46497ee3f56041 Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 368640 Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_cortex-a7.ipk Size: 156586 SHA256sum: 0cc1fb4a9b0e0eeb5b9ad68e282552b8792ffa40e8ac7d090ecbae80560888d9 Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 10240 Filename: oonf-init-scripts_0.9.1-r3_arm_cortex-a7.ipk Size: 2303 SHA256sum: 4695e77ac7ba1d545c2bb86e791d7d3dcf8e473483d8ef441b9d95e8f65567b2 Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022.08.25~1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a7 Installed-Size: 532480 Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_cortex-a7.ipk Size: 232196 SHA256sum: 74d2c18f87b57a3db9ee2b6815c3b440c4fe2024c6c51244d63e87cdfddf9701 Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.3.0-r1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/opennds Architecture: arm_cortex-a7 Installed-Size: 563200 Filename: opennds_10.3.0-r1_arm_cortex-a7.ipk Size: 161401 SHA256sum: abf1f551ae1ed04bb97bb3f7071ddd1feb6731058aeeadb8416dd69f4806dd9d Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018.06.19~dbf4e591-r4 Depends: libc, netifd License: Apache-2.0 Section: net URL: https://github.com/Oryon/pimbd.git Architecture: arm_cortex-a7 Installed-Size: 194560 Filename: pimbd_2018.06.19~dbf4e591-r4_arm_cortex-a7.ipk Size: 83007 SHA256sum: bf69f2552a2be80135e2978d19b9a319f03538a42e78e884016afd1ad2a0b1dd Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-r3 Depends: libc, libjson-c5, libpthread License: MIT Section: net URL: https://github.com/AdvancedNetworkingSystems/prince Architecture: arm_cortex-a7 Installed-Size: 81920 Filename: prince_0.4-r3_arm_cortex-a7.ipk Size: 27595 SHA256sum: 48ee66eacdf9e3d1e5759adc6e4bea736969a486c4df0b513ebaf69854709ead Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013.04.07~7710cce4-r9 Depends: libc, libpthread License: GPL-2.0-only Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a7 Installed-Size: 30720 Filename: vis_2013.04.07~7710cce4-r9_arm_cortex-a7.ipk Size: 10905 SHA256sum: 014cd9bfcb1cad69e54afef98e526662636c9e93b7414fa9343f1cf5036e2353 Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: arm_cortex-a7 Installed-Size: 20480 Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_cortex-a7.ipk Size: 8908 SHA256sum: a99dd65846eeb33dee7236b9e33269c897419b42a8a4a95bdbb3a54c19ccdb7c Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.